Center Place of weave and batik

July 28, 2009 – 5:42 pm

Likely, woven and batik popularity has known in Indonesia even over the world. Beside the quality was good, the price also competitive.
Passed journey 2 hour from Tegal, coming to “batik town” Pekalongan. Inside quite lot center wholesaler. One of them I have visited is “Shopping Center Setono Tour” the most crowded visitor according issue. Although dominate by cloth, the shop was build since 1997, you can found goods household equipment like sarong, pillow, chair, gorden, tablecloth, dining table. A lot of products were completed with border accessories. These soft furnishing goods a lot of made by ATBM (alat tenun bukan mesin), batik (written or cast), or blacu. Setono easy reach by visitor due to position just 1 KM from external station bus.
Quite comfort shopping in Setono. Clean place, shops neat, and the way not too tight. Commonly sellers give special price for large purchasing. Beside Setono, there is Mega Grosir MM (exactly crossing Setono), Shopping Center Medono Tour, and Whosale center Batik-Woven textile Gamer. Almost all shop’s owner accepts custom build order. Order also can be done by phone by term of payment done in advance. Delivery cost has to be paid by buyer. But quite economic, 1 bale just 20.000 IDR. For 100 pieces can finish 10 days. For batik written, it need 3 weeks fastest. Ordinary day, shops in shopping center usually open at 09.00 – 7.00. Enough interest, shops in this shopping center even crowd when celebration holiday. Because those shops have opened in second holiday, even time work longer until 21.00 a clock. Do you want shop when celebrating holiday later? certainly enjoyable.

Orange Peel Finishing

June 11, 2009 – 10:13 pm

When surface result of finishing seen harsh like waving or like surface of peel hence defect called ‘ Orange Peel’ as physically this defect seen. Easiest seen at surface which level off flat because surface with this handicap will not yield good light bound effect ( at melamin type finishing). Peel Orange caused of 3 especial aspects that is temperature & dampness of air, finishing materials viscosities and is thick of coat at the time of douche process.

Viscositas
As liquid size and not measured finishing materials use special measure tube in scale per second the materials emit of stream. If viscosities too low, meaning materials too risk get orange peel although air temperature enough heat. From here what an important is arrange finishing materials viscosities before to use finishing application. Tolerance for best viscosities is 0%. Why? If lower possible we can economize finishing materials but also have defect risk of other finishing, that is air bubble blot. This matter also why mean all finishing professional arrange coat top viscosities (final coat) with lower viscosities.

Temperature and Dampness of Air
One part of the finishing there are materials which is often called of solvent or liquid materials. And in this time the liquid materials there is made from water or thinner (lacquer water based). The Solvent, because volatile in character, will condense also when finishing materials sprayed to object work so that will leave resin or especial materials of finishing at surface of object. Speed of this Evaporation will influence the quality surface of finishing. Peel Orange caused by too quite evaporation and the biggest influencing speed of evaporation is air temperature. Because of that, some big of Furniture Company especially which producing is ‘ flat of furniture’ owning special dryer room to arrange speed of draining as needed. More than that need to be required the dampness of air around object which is drying. Too damp air do not have ‘ room’ to accommodate the evaporation.

Layer
Application Finishing with a few coat have to be taken care of interval time. Second layer only done at the time of first coat enough time to discharging the solvent to air. Also process for to next coat. Materials which have heaped do not have time to disseminate to entire flattened surface due to have been closed over and arrested its movement by next coat, so that can form peel orange.
Besides 3 above mentioned mainly matter, there are some matter which follow to share process forming of peel orange :
1. Air pressure from compressor too low
2. Materials finishing mixing which not yet really flatten
3. Size measure ‘ Nozzle’ at gun spray less precise ( undersize)

Precaution and Repairing
Try to analyze spraying process which usually you do. Ideal distance of spray gun head with object work is between 18 - 23 cm with certain speed. Take care of angle corner lead spray gun always tend to vertical with sprayed surface. Important habit which must always done is trying spray gun at other material object to measure and see result of early so that in the event of defect risk or mistake will not happened at main material object. And vital importance that this trying require to be done each time we change new finishing materials or before adding new materials.

When the peel orange have come at material wood hence the best way is paring surface of finishing till surface of wood look like when before finishing. Emery only some of layer of thick do not be recommended. But there are some finishing type which designing to yield surface like peel. In this case we study melamine finishing requiring result of surface as smooth as glass.
Are you looking for more information on fly fishing? Then take a look on the net and find what your looking for. Whether your searching for facts regarding fishing rods or for clear answers on a fishing trip Alaska, you’re sure to find what your searching for.

Determining Garden Furniture

June 1, 2009 – 9:50 am

Do you have patio or lawn area at your home? If you are, is this enjoyable for you or someone who visits it? Have you ever think to make your garden more nicely and comfortable.  The garden nuance will look exciting with some creativity touch.  Luckily, at this time many gardener designs combined their idea with garden furniture to make the area look special. Indeed, each people have different interesting with some furniture garden type. The important is a function, what for the garden purposed when you design it. Just for children playing area or to entertain you guest or colleague, or other purpose. If you have determined it, then the gardener design can start to explore their ability.
If you need garden area for serving guest, should not be crowded with too much furniture. If you entertain guest frequently, perhaps you need some benches. Additional table and chair garden also help when you serve meal together without leaving the garden area. Most of garden furniture was made from teak due to an extremely durable, tight-grained hardwood that is not only strong, but extremely attractive, and comes in a range of natural shades. The rubber and natural oil content provide extra protection against fungus that can set in when the wood is wet for prolonged periods. It’s so impervious to the weather, that some people leave their garden furniture outside, year-round without covers. The garden climate should be comfortable. Put umbrella in the top of table and some trees will helpful to make air condition fell fresh. You can add hammock under trees, fasten the hammock between two trees or you can buy a hammock stand for quick solution.
On other hand there are some people prefer soak under sunshine, lounger is suitable furniture for this necessary. Garden area looks unfinish if it is bare of furniture. Patio or lawn will completely looks well when be combined with garden furniture. Gardener can place furniture in everywhere location, the important think is heater and light. Be sure your garden gets enough heat for both daily and season. Light also help situation nicer when you entertain a guest at the night. The last, when you finished to plant design, check one more again through all position garden. If there is something unsuitable, try to arrange again and again till you find the best according yourself and ask your other family or friend if this needed. Furthermore information visits our site at teak garden furniture.

ANTIQUE REPRODUCTION FURNITURE CATALOGUE

May 27, 2009 – 12:22 am

Do you looking for new furniture, especially for antique reproduction furniture theme? If you are, this is right time to look something different from what you have purchased previous years. Don’t be hurry to buy new furniture if you don’t want to be missing out the best release furniture deal on the market today. What is happens if you done, there is no chance to return well, and you have to buy other furniture again. If you don’t know furniture market well, its better way you do research first before purchasing. Of course it’s need more spend time to learn than you hurry to buy then neglect after. This method to make your right decision as you wishes before.
Antique reproduction furniture is main example. A lot of people neglect after purchased the furniture. Mainly the problems lay on the quality and strengthen. Everyone talk about luxurious and histories of antique furniture. So, everyone also wants to have similar furniture as like it. Who care about since the buyer little knows and don’t fully understand regarding the characteristic of original antique furniture. Apparently, many homeowners are hunting antique furniture. They may talk about high class, luxurious and expensive furniture, but when they found antique reproduction furniture or replica antique furniture. The deals transactions even run well in this field. As we know, a big part of people have different personal preference. Some like classic, contemporary, minimalist, rustic design. We usually see a couple of human to debate arguing about this. The color too bright, engraving less deep, fibrous of wood bit less appear, etc. To fulfill this demand, supplier repro furniture must be full understand and creative in process production.
People are starting to look for antique reproduction furniture due to affordable price than original antique furniture. Original antique furniture price very high, not all people can reach it, just rich or expatriate people that can buy. Beside that the repro furniture is easy to be found on the market, almost available on every furniture market. They came in all design and finishing such as naturally, fancy, glossy, doff and other paint. Before you go in the market to shop, make sure you have your own catalogue furniture that you can get from furniture store or supplier furniture. If you have more money to spend it, you can go to design interior or architect to consult what is the best antique repro furniture today and suitable for your design entire room. If you want browse online, indonesia furniture website is suitable place to guide your idea. There are many antique reproduction furniture designs available for sale.
This is time for you to explore your idea and get full support to guide your knowledge about antique furniture.

Stair in Guest room

May 19, 2009 – 8:24 pm

Putting stair in the guest room is design which made many west nations. This form many found in lobby high class star hotel over the world. The design can improve value of extraordinary. Even trusted can give greatness somebody walks in part of ladder. But we have to know, where and how the design has good value.

Not at home
The design gets optimal function if distance between doorstep and tip stair widely and has high ceiling. Because this, putting stair in the middle of guest room should be considered due to wide area in house not large like in the hotel. Don’t get extraordinary instead obstacle uncomfortable home owner. Some reason that can be used for considering such as:
-    When owner use this stair from or to go up floor. Surely they pass guest room. Moment no guest, it’s no problem. But when there is guest and the owner not dress up yet, of course this condition will make obstacle home owner.
-    When get guest, many up or down activity in stair of course will disturb both guest and home owner.
-    In certain condition, guest that sit in the guest room will can see foot and thigh somebody which up or down in the stair. Viewing that can caused negative should be avoid.

Look like saw
Stair, in Feng Shui explained as bad object. Stair doesn’t need to be out exposed, because believed will disturb carrier and generating disaster. Explained that stair also source  Sha Qi or killer energy. So that reason, stair location should be hidden and save in closed place. In order part of stair which has form like saw, don’t make disaster or destroy atmosphere at home. Some reasons Feng Shui give bad evaluation for stair in the guest room are:
-    If stair looked directly from guest room, Qi quality can be destroyed become bad Qi (Sha Qi). This composition has bad effect and should be avoided. Because fortune should be used to improve carrier can’t use at all. Even Qi characteristic next become evil that will hurt or block occupant carrier.
-    Stair mentioned able misfortune due to somebody which up or down stair can’t concentrate if they have to address somebody in guest room. If not careful, he/she can fall.
-    Stair can destroy household relation. Because if ethics matter above don’t considering. Outsider tempted to think ugly.

For that reason, stair in the guest room ought to be eliminated. If impossible to be removed, have to effort to close whole all part of stair in order really not appear from guest room. Thereby, Feng Shui mistaken can be avoided.