Drawer Installation Construction
January 8, 2008 – 12:43 amEspecial condition at the time of making drawer is those drawers have to be fluent when opened and also closed often possible. If you have consumer from Europe or America, they will ask special test for the drawer of with burden and frequency to open / cover, according to the test and standard is not easy to be passed. To making good drawer is not difficult during some order making of cabinet followed truly. With existence of various furniture type from modern and classic, way of drawer installation also have started to move.
Modern Furniture Design in this time always provided with drawer reel from very good metal, even with mechanical system possibility entire drawer length can be opened. Main cabinet areas have to on course elbow at all of board angle, corner from other side, upper and lower so that drawer position to stable cabinet body. This Especial principle has to always major. Later then make a few wide of wood area (board from other side drawer) which is have friction to with cabinet wall if you use wood as drawer reel. Give wax/candle coat at the wood reel for the fluent of drawer movement.
Board face drawer
Putting of board face drawer to wall cabinet determine difficult and not it drawer installation. Face drawer board which flatten with thick side of cabinet wall technically installation more difficult and need high precision. Besides surface must really flatten to yield better esthetics value, gap between drawer face boards with wall from other side have to equal size. Face drawer board which located in wall front from other side will be easier to technically installation. And although afterwards there are wall area transformation from other side after usage some times will not generate gap at its frontage.
Board side drawer
Have to be made from solid wood materials especially for the construction of drawer using reel from wood so that drawer mechanism fluently. And choose wood materials owning density enough (do not too soft).
Board Behind drawer
Can use thick same with board from other side. Using MDF is also recommended for the cabinet of in room using mechanical reel. To be wide of drawer which can use, back board can be made deeper than tip of behind board from other side so that when drawer pulled exit entirely, wide of inner drawer can be reached.
Board bottom drawer
Standard thick if made by board is between 4-6 mm and 8-10 mm for the solid wood. Flimsier will get risk torsion because decrease of wood. To facilitate in tuning, production and packing at down knock furniture, bottom board of drawer better be made by path beside with wide tolerance of path a little thick more than bottom board of drawer.
If you are trying to find information on modular homes and you are a new home buyer, now-a-days modular homes are a fantastic way to get a gorgeous new home for the family and save a lot of money. There is no question that modular home floor plans are great for new home buyers too.
